Surface-mounted LED light: elegance meets timeless design
A surface-mounted LED luminaire sets accents in modern lighting with its clear and classic design . Both the design language and the emitted light beam harmonize and accentuate the interior design!
The cylindrical design allows all the advantages of LED technology to be optimally showcased. This enables highly efficient, energy-saving lighting. The directional light also contributes to the economical light source!
By using secondary optics, the beam angle of the LEDs is focused and you only have the light where you need it. This contrasts with the familiar light bulb, which emits its light at a solid angle of 360°.
To give you the opportunity to make a conscious statement, we offer surface-mounted LED luminaires in different housings and light colors. Our credo is: “The decision should clearly lie with the customer and not with the retailer!”
What are the hard facts about the LED surface-mounted light?
Regardless of the model, you can choose the light color yourself. Do you prefer the cozy warm white 2700K? Or would you like to adjust the color temperature, then go straight for the tuneable white version. This can be adjusted between 2200K and 5700K, i.e. from warm to neutral to cool white. The tuneable white version emits exactly the same amount of light as the unicolor version! Even if both LED circuits are inadvertently fully activated. This means that the LEDs are neither overloaded nor is there any loss of brightness due to a reduction in light in advance! We have developed and included our own electronic hardware circuit for this purpose.
The surface-mounted LED luminaire is also available as an RGBW (= “full color”) version. Here too, the same circuit is included as for the tunable-white spots. Finally, it should be added that all the above-mentioned spots have exactly the same beam characteristics in warm white. In other words, you can mix the spots in one and the same room and not notice any difference in the basic lighting!
What are the advantages of the surface-mounted LED light?
In the development of our highly efficient light engines (installed in the LED spotlights, among other things), we have gone one step further than what is currently available on the market. We used our in-house lighting laboratory and spent a lot of time there.
There are three components that are in great contradiction to each other: high efficiency, high color rendering index and low price. To put it simply, if you optimize one of these parameters, the other two deteriorate. And this is exactly where we applied the lever and did not let up. We took a completely new approach and focused on the secondary parameters (thermal design, degradation, etc.) during development. This was the only way we were able to do without the usual compromise!
What does this mean for you? Firstly, fewer light sources – therefore lower follow-up costs as less wiring and construction work is required. Secondly, a more natural, better light thanks to a brilliant color rendering index (>90). Thirdly, a highly efficient spotlight at a fair price!
What is the difference between the surface-mounted LED light and LED spotlights?
Before we get to the differences, let’s quickly mention a very important similarity! Both can be excellently dimmed and adjusted with 24V! Even set mixed colors can be dimmed and do not change their color at low brightness.
As you can see with the competition, this is not a matter of course. In addition to the excellent color rendering index, both families are characterized by enormous efficiencies. Especially with such brilliant light, this usually falls by the wayside. But now let’s look at the differences:
Surface-mounted LED light:
The most obvious difference is, of course, the design. However, this also results in technical refinements. As a result of the larger surface area, which is not built into the ceiling, thermal management works better. As a result, this leads to a higher output from the light engine. The focus here is clearly on efficiency and high light output. The built-in light engine delivers over 850lm with a CRI of >90! (almost equivalent to the brightness of a 100W light bulb) and all this with less than 8W! What’s more, there is no need for a ceiling cut-out – the luminaire can simply be mounted directly on the ceiling or surface!
The LED surface-mounted luminaire is available in different colors and blends harmoniously into your interior design with a clear design language and sets accents! Elegance meets timeless design!
LED spotlights:
We offer different series of recessed spotlights. These 24V LED spotlights are installed directly in the suspended ceiling and are a classic in modern but timeless lighting.
These spotlights are characterized by a low installation depth and the ability to swivel! However, the light output does not need to hide here – just compare the lumens (not the watts – watts were yesterday) with those of the competition.
Free lighting and electrical planning tool
Our lighting and electrical planning tool offers a variety of tools that support the implementation of lighting concepts in the smart home. Among other things, it includes calculation tools and is ideal for project documentation. Automatic calculations …
- of the voltage drop, especially when wiring the surface-mounted LED spotlight
- the number of surface-mounted LED lights for each room
- of the cable cross-section depending on the voltage drop
- the number of dimmers and power supply units depending on output and lighting circuits
- of the voltage drop for LED strips
Matching, interesting categories:
LED strips are true all-rounders in lighting.
Whether for indirect lighting, as under-cabinet lighting in the kitchen (pay particular attention to a high color rendering index: CRI), as effect lighting or for retrofitting and optimizing existing lighting systems – our extensive industry knowledge in component selection allows us to offer first-class products at an excellent price.
Would you prefer a recessed LED spotlight instead of a surface-mounted LED light? Would you like LED spotlights in the ceiling that are almost flush-mounted? Then find out about our wide range of variations in this category. Whether flat, pivoting, powerful, … we are guaranteed to have the right LED spotlight for the ceiling.
All the features of the surface-mounted LED lights are included here, as well as the different colors and a variety of fronts!
The right products for creating lighting scenes, whether surface-mounted LED luminaires, LED strips, retrofit luminaires, incandescent/halogen bulbs, LED spotlights … Here you will find the right devices and dimmers to control your light sources.
As we operate a wide range of interfaces (DMX/DALI/1-10V/…), Emilum products can be easily connected to your existing system and your lighting can be expanded and modernized without any complications.
