0-10V control with analog output: for dimmers, heating control valves, ...
Discover the versatility of 0-10V controls! The 0-10V analogue output is a standardized solution that enables precise control of lighting and other electronic devices.
With four separate channels, we offer a flexible and reliable way to customize and optimize your applications.
Precise control with 0-10V analog output
The 0-10V analog output enables precise control of voltages in the range from 0 to 10 volts. This interface is often used in various applications such as lighting control, actuators for heating and cooling and other smart home applications. By using analog output voltages, fine adjustments can be made and your system can be set to your exact requirements.
Flexibility through 4 independent channels
With four separate channels, our 0-10V actuator offers maximum flexibility for your applications. You can control each channel independently, giving you a variety of configuration options. Whether you want to control different light sources in a room or optimize complex heating control valves and cooling systems, this product gives you full control.
Integration with DMX for extended functions
Integrating DMX as an input interface opens up even more possibilities for controlling and automating your smart home. DMX is a widely used protocol in lighting and entertainment technology, find out more in our ultimate DMX tutorial. This interface enables seamless integration with a wide range of DMX devices and systems and is fully in line with the Emilum philosophy: safe, simple, smart! You can program light scenes, create schedules and automate complex sequences – all via a single interface.
Applications for the 0-10V interface
The 0-10V interface offers a wide range of possible applications, here are some examples:
- Dimming: You have existing 0-10V dimmers and want to integrate them into your system
- Actuators: The 0-10V interface is a great way to operate standard heating actuators at low cost
- Motor control: Use the 0-10V interface to precisely control motors and optimize motion sequences.
- Climate control: Integrate the 0-10V output into your HVAC systems to precisely control temperature and humidity.
- Pump systems: Optimize the performance of your solar systems, for example, by adjusting the output voltage according to the light conditions.
Is dimming with the 0-10V interface still up to date? Advantages and disadvantages:
In principle, other interfaces are now preferred, especially in new buildings, specifically DMX and DALI. This is mainly due to the fact that these are digital interfaces, which guarantee greater reliability as well as more options. The LED luminaires with safety extra-low voltage (all below 60V) are dimmed using so-called PWM. DMX dimmers are then installed within a new control cabinet.
However, there is no reason why existing 0-10V dimmers cannot be used! These can be easily converted with the DMX to 0-10V actuator into the (smart home) system!
Discover the possibilities with the 0-10V control from Emilum:
Whether you want to improve your lighting, optimize your heating and cooling systems or control other complex smart home applications, our DMX to analog gives you the flexibility and precision you need. Contact us today to learn more about Emilum ‘s 0-10V analog output and find out how it can improve your applications.
The matching products for this theme area in our online store
Everything you need to know about DMX, addressing and cabling
Our service area also offers much more:
In addition to our comprehensive LED expertise, our service area also offers an exciting video channel, an active social media community and the popular electrical calculator. If you need further information, have any suggestions or would like to get in touch with us, we will be happy to help and advise you. You can also find more information, detailed descriptions and light measurement reports in our online store.
In our video blog you will find tips & tricks for installation, operation and best-practice solutions
A comprehensive tool for calculating the number of spots, lighting circuits, voltage drops on the lines and much more.
Other suitable & interesting categories for the 0-10V control unit
Are the “Swiss army knife” of lighting. Whether for indirect lighting, under-cabinet lighting in the kitchen (please pay particular attention to a high colour rendering index: CRI), effect lighting or for retrofitting and optimizing existing lighting. It is completely independent of whether you dim your LED strips using 0-10V, DMX or DALI. We proudly present TOP products at a great price.
Gone are the days when a spotlight simply emitted light. Thanks to technical sophistication, our products have several features on request and adjust the lighting mood just as you want it. Quality was the top priority here, because gone are the days of having to deal with replacing light sources. Our 24V recessed luminaires are perfectly controllable with all PWM dimmers and guarantee lighting at the highest level
The right products for creating lighting scenes, whether LED strips, retrofit luminaires, incandescent/halogen bulbs, LED spots… here you will find the right devices and dimmers to control your light sources.
As we operate a variety of interfaces (0-10V/DMX/DALI/…), Emilum products can be easily connected to your existing system and your lighting can be expanded and modernized without any complications.
